Monday, April 29, 2013

How to Attach Luan Plywood to Concrete

Attach Luan to Concrete


 Attaching Luan to Concrete Floors, is possible if you first overlay the concrete with a think material such as plywood, then use the Laun Material overtop of that. You should use fasteners to attach the thicker plywood pieces to the floor. The best option when using fasteners is to use nails or cememt nails.

 If you're using the nails made of cement you must first make sure that all the heads of the nails are covered in a putty or smooth finish. The reason for this is that the nail's hard top surface over time will destroy the the laun board material.

Those are some basic steps in Attaching luan to concrete subfloor, although you might find that other methods are equally as effective as this.


How to Install a Subfloor With Luann Plywood

When installing luann, you can place the laminate directly over the luann plywood. This will work regardless of room temperture, and will lock out moisture if that is a concern of yours as well. When you attach the flooring, use staples with a quarter crown. They are small and fast, and they won't leave holes if you decide down the line to refinish the flooring. Also leave quarter inch expansion at all vertical walls. This is important to allow for strinkage and expansion during different climate conditions which you may experience throughout the year. Read More


Installing Subflooring for Laminate, Vinyl, Tile or Hardwood (With Luan Plywood) 
.
1. Use as thick a subflooring material as you can, or you can find. This will be important when moving on to the grout and tile work. 2. Stiffen the floor to ensure that the new subfloor will be strong than the previous flooring. 3. Nails may not be strong enough for installation and may pop out. Use a ring shank nail, and it is basically a screw. Read More



Luan As an Underlayment For Vinyl



Because Vinyl, forms very tightly to the surface floor when installed it tends to show all uneven patches, and groves. To reduce the appearance of surface floor when you install Vinyl, or any other flooring material a good choice to use is Luan.

Luan, is a thin plywood underlayment that is light, and very simple to install. While Luan does help in smoothing out surface floor irregularities, it is not always the best solution for all flooring types. Read More



Where to buy Luan Plywood:

Luan Plywood is available at stores such as Lowes and Home Depot, in various sizes from ¼ to 1/8 and it usually found in the woodcraft aisle in store.  You may have to ask someone to assist you with finding it, if it is not readily accessible at first glance when you arrive in the store. If you go to Lowes or Home Depot you may also find MDF board available in similar sizes such as ¼ to 1/8 .  Luan plywood is relatively cheap to buy and its also a great multipurpose underlayment for floors as well as smaller hardware projects around the home.

1 comment:

  1. of area rugs and cut down on concrete's echo effect with curtains, pillows and wall fabrics. Because of its natural thermal elements, concrete flooring is ideal for radiant heating.
    Epoxy Flooring

    ReplyDelete