When installing laun underlayment, make sure the smooth side is facing up and any screws, nails or staples from installing the laun are hammered down, and when complete use a putty to ensure there are no gaps between the boards. This ensures an even surface for installation of the finished flooring.
Great Tips For Bending Plywood
Importance For Installing For Vinyl or Laminate Flooring
Because Vinyl, forms very tightly to the surface floor when installed it tends to show all uneven patches, and groves. To reduce the appearance of surface floor when you install Vinyl, or any other flooring material a good choice to use is Luan. Luan, is a thin plywood underlayment that is light, and very simple to install. While Luan does help in smoothing out surface floor irregularities, it is not always the best solution for all flooring types. Description of Luan
What is Luan ?
Luan is a quarter inch thick, and usually is delivered in 4 x 8 sheets. It is manfactured by stacking thin strips of mahogany at right angles then bonding them to form large panels. The panels have an abrasive side and a smooth side. The smooth side should be placed facing up, when using the material as an underlayment.
Great Tips For Bending Plywood
No comments:
Post a Comment