You should cut luan wood sheet using a handheld saw, by placing the plywood sheet face down, and then using a table saw through the sheet evenly. Once this has been completed, set the depth on your circular saw, and then there will be less chance of the plywood splintering when you are going through the material. Use a proper support to keep the plywood steady, if you are using a handheld cutting tool. And lay masking tape along the cut line if you have to cut the plywood from the front.
How to Bend Plywood
This will protect the veneer and keep it from splintering. If you are using a jigsaw or a reciprocating saw, then apply speed at a ginger rate of around three-quarter speed. Use the cut line as guide for your cut with a utility knife as an alternative to laying masking tape.
Remember to place enough pressure with the knife to break through the surface veneer so it will already be evenly cut when you use the saw to cut through the rest of the sheet.
Luan Wood Video Series
Bending Luan Wood Video
Installing Luan Wood Video
Cutting and Installing Vinyl Over Luan
Installing Luan Over Subfloor
Laying laminate over Subfloor
Making Tile Flush With Subfloor
Attaching Luan To Subfloor
Working With Luan For Do It Yourselfers
The Houston Energy Boom
Pine Creek at 3600 College Park
Tema Development Houston
Green Street Houston Pavillions
Upper Kirby Midway Development
Hines Ziegler Cooper Property Management
Hines Property Management Plans
Houston Skyline and 5 Allen Centre
Chevron relocating to Houston Downtown?
Houston Project : 3009 Oak Park Development
Midland Energy Tower - Tallest in Texas Outside Houston or Dallas
No comments:
Post a Comment